Items where Author is "Monostori, László"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type | No Grouping
Number of items: 353.

1992

DateAuthor/TitleDocument Type
1992Monostori, László and Barschdorff, D.
Artificial neural networks in intelligent manufacturing
Article
1992Monostori, László and Bothe, A.
Convergence behaviour of connectionist models in large scale diagnostic problems
Conference or Workshop Item
1992Barschdorff, D. and Monostori, László and Aron, R. and Bothe, A. and Kottenstede, T. and Wöstenkühler, W.
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)
Book
1992Kottenstede, T. and Monostori, László and Müller, M. and Rosenberger, U.
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik
Book
1992Barschdorff, D. and Monostori, László and Kottenstede, T. and Warnecke, G. and Müller, M.
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik
Book
1992Monostori, László and Markos, S. and Krämer, S. and Nacsa, János and Szöllősi, G.
Neural networks for modelling and monitoring of manufacturing processes; milling
Conference or Workshop Item
1992Barschdorff, D. and Monostori, László
Symbolicism and connectionism: rivals or allies in intelligent manufacturing?
Article
1992Monostori, László
The role of artificial neural networks in intelligent manufacturing
Conference or Workshop Item

1993

DateAuthor/TitleDocument Type
1993Barschdorff, D. and Monostori, László and Kottenstede, T. and Warnecke, G. and Müller, M.
Cutting tool monitoring in turning under varying cutting conditions; an artificial neural network approach
Conference or Workshop Item
1993Monostori, László
Intelligent manufacturing through neural networks
Conference or Workshop Item
1993Markos, S. and Monostori, László and Nacsa, János and Szöllősi, G.
Monitoring of the milling process through neural network and fuzzy techniques
Conference or Workshop Item
1993Monostori, László
Neuro-fuzzy modelling and monitoring of manufacturing processes
Conference or Workshop Item
1993Barschdorff, D. and Monostori, László and Kottenstede, T. and Warnecke, G. and Müller, M.
Wear estimation and state classification of cutting tools in turning via artificial neural networks
Conference or Workshop Item
1993Monostori, László
A step towards intelligent manufacturing: modelling and monitoring of manufacturing processes through artificial neural networks
Article

1994

DateAuthor/TitleDocument Type
1994Monostori, László
Combining neural and fuzzy techniques in monitoring and control of manufacturing processes
Conference or Workshop Item
1994Monostori, László and Egresits, C.
Modelling and monitoring of milling through neuro-fuzzy techniques
Conference or Workshop Item
1994Monostori, László
Monitoring of manufacturing processes by ANN and neuro-fuzzy techniques
Conference or Workshop Item
1994Egresits, C. and Monostori, László
NEURECA: an object oriented system under Windows for ANN based monitoring and control of industrial processes
Conference or Workshop Item
1994Monostori, László and Egresits, C. and Zsoldos, L.
On the application of hybrid AI techniques in manufacturing
Conference or Workshop Item
1994Monostori, László
Some results in neuro-fuzzy monitoring of manufacturing processes
Conference or Workshop Item

1995

DateAuthor/TitleDocument Type
1995Monostori, László and Kádár, Botond and Egresits, CS
Application of hybrid AI techniques in manufacturing
Conference or Workshop Item
1995Barschdorff, D. and Monostori, László and Wörstenkühler, GW and Egresits, CS and Kádár, Botond
Approaches to coupling connectionist and expert systems in intelligent manufacturing
Conference or Workshop Item
1995Egresits, CS and Monostori, László
Combined structure and parameter learning for control applications
Conference or Workshop Item
1995Monostori, László and Egresits, Csaba
Combined structure and parameter learning for intelligent manufacturing applications
Conference or Workshop Item
1995Monostori, László
Connectionist and neuro-fuzzy techniques in intelligent manufacturing
Conference or Workshop Item
1995Monostori, László and Kádár, Botond and Egresits, CS
Coupling expert systems and artificial neural networks: a hybrid AI solution and its application in manufacturing
Conference or Workshop Item
1995Kádár, Botond and Egresits, CS and Monostori, László
HYBEXP: a hierarchically coupled hybrid AI approach to production control
Conference or Workshop Item
1995Monostori, László
Hybrid AI approaches for intelligent manufacturing
Book Section
1995Monostori, László
Hybrid AI approaches for supervision and control of manufacturing processes
Conference or Workshop Item
1995Monostori, László
Hybrid AI approaches to control and monitoring of manufacturing processes
Conference or Workshop Item
1995Egresits, Csaba and Monostori, László
Hybrid learning approaches for intelligent manufacturing
Conference or Workshop Item
1995Szelke, E. and Monostori, László
Intelligent manufacturing with reactive/proactive scheduling and learning for dynamic operation management
Conference or Workshop Item
1995Egresits, CS and Monostori, László
NEURECA: an ANN based system for monitoring and control of industrial processes
Conference or Workshop Item
1995Egresits, CS and Monostori, László
Neuro-fuzzy systems as hybrid AI solutions to diagnostic problems
Conference or Workshop Item
1995Monostori, László and Egresits, CS
On hybrid learning and its application in intelligent manufacturing
Conference or Workshop Item
1995Mezgár, István and Egresits, CS and Monostori, László
Re-engineering of robust manufacturing system configurations
Conference or Workshop Item
1995Szelke, E. and Monostori, László
Reactive and proactive scheduling with learning in reactive operation management
Conference or Workshop Item
1995Monostori, László and Kádár, Botond and Egresits, CS
Virtual manufacturing by coupling connectionist and expert systems
Conference or Workshop Item
1995Monostori, László and Kádár, Botond and Egresits, CS
Virtual manufacturing using a hierarchically coupled hybrid AI system
Conference or Workshop Item

1996

DateAuthor/TitleDocument Type
1996Osanna, PH and Monostori, László and Alpek, F. and Viharos, Zsolt János
Fertigungsparameter schätzung zur vorgeschriebenen Oberflächenqualität mittels neuronaler Netze
Conference or Workshop Item
1996Monostori, László
From pattern recognition techniques through artificial neural networks to hybrid AI solutions in manufacturing
Conference or Workshop Item
1996Egresits, CS and Hornyák, J. and Monostori, László
Generation and tuning of fuzzy control structures using genetic algorithms and neural learning
Conference or Workshop Item
1996Monostori, László and Egresits, CS and Kádár, Botond
Hybrid AI solutions and their application in manufacturing
Conference or Workshop Item
1996Szalay, T. and Alpek, F. and Monostori, László and Markos, S. and Viharos, Zsolt János
Investigation of machined surfaces using artificial intelligence methods
Conference or Workshop Item
1996Kádár, Botond and Markos, S. and Monostori, László
Knowledge based monitoring and management of manufacturing cells
Conference or Workshop Item
1996Kádár, Botond and Markos, S. and Monostori, László
Knowledge based reactive management of manufacturing cells
Conference or Workshop Item
1996Monostori, László and Márkus, András and van, Brussel H and Westkämper, E
Machine learning approaches to manufacturing
Article
1996Mezgár, István and Egresits, CS and Monostori, László and Kovács, György
A coupled system for re-engineering of robust manufacturing system configurations
Conference or Workshop Item
1996Gödri, I. and Monostori, László
An integrated approach to design, manufacturing and assembly/disassembly
Conference or Workshop Item
1996Márkus, András and Kis, Tamás and Váncza, József and Monostori, László
A market approach to holonic manufacturing
Article

1997

DateAuthor/TitleDocument Type
1997Monostori, László and Hornyák, J. and Egresits, CS
ANN and hybrid AI approaches to financial and business problems
Article
1997Barschdorff, D and Monostori, László and Wostenkuhler, G W and Egresits, Csaba and Kádár, Botond Géza
Approaches to coupling connectionist and expert systems in intelligent manufacturing
Article
1997Mezgár, István and Egresits, Csaba and Monostori, László
Design and real-time reconfiguration of robust manufacturing systems by using design of experiments and artificial neural networks
Article
1997Monostori, László and Kádár, Botond
Distributed manufacturing, extended enterprises
Article
1997Monostori, László and Egresits, CS
Felügyeleti és diagnosztikai rendszerek
Book Section
1997Egresits, CS and Monostori, László
Genetic algorithms for automatic design of fuzzy decision systems for intelligent manufacturing
Conference or Workshop Item
1997Monostori, László and Szelke, E. and Kádár, Botond
Intelligent techniques for management of changes and disturbances in manufacturing
Conference or Workshop Item
1997Monostori, László and Szelke, E. and Kádár, Botond
Management of changes and disturbances in manufacturing systems
Conference or Workshop Item
1997Váncza, József and Monostori, László and Egresits, CS
Mesterséges intelligencia módszerek
Book Section
1997Egresits, CS and Monostori, László and Hornyák, J.
Multistrategy learning approaches to generate and tune fuzzy control structures and their applications in manufacturing
Conference or Workshop Item
1997Monostori, László and Egresits, Csaba
On hybrid learning and its application in intelligent manufacturing
Article
1997Monostori, László
On the application of multistrategy learning and hybrid AI approaches in intelligent manufacturing
Conference or Workshop Item
1997Viharos, Zsolt János and Monostori, László
Optimization of process chains by artificial neuronal networks and genetic algorithms using quality control charts
Conference or Workshop Item
1997Janusz, B. and Bongaerts, L. and Gullander, P. and Klingstam, P. and Monostori, László and Jordan, P.
Shop floor control architectures for the extended enterprise
Conference or Workshop Item
1997Gödri, I. and Monostori, László
Simulation and novel control techniques for re-engineering purposes
Conference or Workshop Item
1997Hornyák, J. and Monostori, László
A feature extraction technique for ANN-based financial forecasting
Article
1997Kádár, Botond and Monostori, László and Szelke, E.
An object oriented framework for developing distributed manufacturing architectures
Conference or Workshop Item
1997Kádár, Botond and Monostori, László
A simulation framework for development and evaluation of agent based manufacturing architectures
Conference or Workshop Item
1997Monostori, László and Kádár, Botond and Erdélyi, F.
A termelés-informatika fejlődési tendenciái
Book Section

1998

DateAuthor/TitleDocument Type
1998Monostori, László and Kádár, Botond
Agent based architectures for mastering changes and disturbances in manufacturing
Conference or Workshop Item
1998Kádár, Botond and Monostori, László
Agent-based control of novel and traditional production systems
Conference or Workshop Item
1998Monostori, László and Kádár, Botond Géza and Hornyák, József
Approaches to managing changes and uncertainties in manufacturing
Article
1998Monostori, László
Artificial intelligence and machine learning techniques for control and monitoring of manufacturing processes
Conference or Workshop Item
1998Monostori, László
Editorial to the special issue of the Journal of Intelligent Manufacturing on agent-based manufacturing
Article
1998Monostori, László
Editorial to the special issue on soft computing approaches to manufacturing
Article
1998Hornyák, J. and Monostori, László
Genetic algorithms for predictive and reactive scheduling in manufacturing systems
Conference or Workshop Item
1998Bongaerts, L. and Monostori, László and McFarlane, D. and Kádár, Botond
Hierarchy in distributed shop floor control
Conference or Workshop Item
1998Monostori, László
Intelligens gyártórendszerek: a kutatás és a nemzetközi együttmőködés új paradigmája. (Intelligent manufacturing systems: new paradigm in research and international co-operation.)
Article
1998Monostori, László and Szelke, Erzsébet and Kádár, Botond Géza
Management of changes and disturbances in manufacturing systems
Article
1998Monostori, László and Kádár, Botond and Hornyák, J.
Management of changes and disturbances in production systems
Conference or Workshop Item
1998Egresits, Csaba and Monostori, László and Hornyák, József
Multistrategy learning approaches to generate and tune fuzzy control structures and their application in manufacturing
Article
1998Monostori, László and Hornyák, J. and Kádár, Botond
Novel approaches to production planning and control
Conference or Workshop Item
1998Markos, S. and Viharos, Zsolt János and Monostori, László
Quality-oriented, comprehensive modelling of machining processes
Conference or Workshop Item
1998Monostori, László
Sensor integration, state and situation recognition, learning in intelligent manufacturing
Conference or Workshop Item
1998Monostori, László and Hornyák, J. and Egresits, CS and Viharos, Zsolt János
Soft computing and hybrid AI approaches to intelligent manufacturing
Conference or Workshop Item
1998Kádár, Botond Géza and Monostori, László and Szelke, E
An object-oriented framework for developing distributed manufacturing architectures
Article

1999

DateAuthor/TitleDocument Type
1999Monostori, László and Kádár, Botond
Agent-based control of manufacturing systems
Conference or Workshop Item
1999Váncza, József and Monostori, László and Egresits, CS
Alapvető mesterséges intelligencia technikák. (Fundamental artificial intelligence techniques.)
Book Section
1999Viharos, Zsolt János and Monostori, László
Automatic input-output configuration and generation of ANN-based process models and their application in machining
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László and Markos, S.
Dobór wejśa i wyjśa sieci neuronowych modelujcych procesy skrawania. (Selection of input and output variables of ANN-based modelling of cutting processes.)
Article
1999Kádár, Botond and Monostori, László
Elosztott intelligenciájú (holonikus) gyártórendszerek. (Holonic manufacturing systems: manufacturing systems with distributed intelligence.)
Book Section
1999Ilie-Zudor, A. and Monostori, László and Kádár, Botond and Liszka, L.
Evaluation and compare of novel production paradigms and their control architectures
Conference or Workshop Item
1999Liszka, L. and Kádár, Botond and Monostori, László and Ilie-Zudor, A.
Extended enterprise - Basic concepts, enabling information technologies, open questions
Conference or Workshop Item
1999Hornyák, J. and Monostori, László
Genetic programming for feature extraction in financial forecasting
Article
1999Monostori, László and Kádár, Botond
Holonic control of manufacturing systems
Conference or Workshop Item
1999Ilie-Zudor, A. and Monostori, László
Incorporation of environmental issues in production control
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László
Intelligent, quality-oriented supervisory control of manufacturing processes and process chains
Conference or Workshop Item
1999Monostori, László and Egresits, CS
Mesterséges intelligencia alkalmazások a gépipari folyamat felügyeletben. (Artificial intelligence applications in monitoring of manufacturing processes.)
Book Section
1999Monostori, László and Viharos, VZS
Multipurpose modelling and optimisation of production processes and process chains by combining machine learning and search techniques
Conference or Workshop Item
1999Szelke, E. and Monostori, László
Reactive scheduling in real time production control
Book Section
1999Monostori, László and Viharos, Zsolt János and Markos, S.
Satisfying various requirements in different levels and stages of machining using one general ANN-based process model
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László and Markos, S.
Selection of input and output variables for ANN based modeling of cutting processes
Conference or Workshop Item
1999Kádár, Botond and Mikó, P. and Monostori, László
Simulation and optimization of production and logistic systems with the SIMPLE++ package
Conference or Workshop Item
1999Monostori, László
Subsymbolic and hybrid artificial intelligence techniques in financial engineering
Article
1999Stefán, P. and Monostori, László and Erdélyi, F.
Using symbolic and sub-symbolic methods in solving problems difficult to analyze
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László
A compromise oriented optimization tool for supporting decision making in machining
Conference or Workshop Item
1999Ilie-Zudor, A. and Monostori, László
An environmentally benign approach to agent-based manufacturing
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László and Markos, S.
A framework for modelling, monitoring and optimisation of manufacturing processes and process chains by using machine learning and search algorithms
Conference or Workshop Item
1999Viharos, Zsolt János and Monostori, László
A general, ANN-based cutting model and its application in different phases of manufacturing
Conference or Workshop Item
1999Dolinsek, S. and Kopac, J. and Viharos, Zsolt János and Monostori, László
An intelligent AE sensor for the monitoring of finish machining process
Conference or Workshop Item

2000

DateAuthor/TitleDocument Type
2000Monostori, László and Kádár, Botond and Viharos, Zsolt János and Mezgár, István and Stefán, P.
AI and ML techniques combined with simulation for designing and controlling manufacturing processes and system
Conference or Workshop Item
2000Viharos, Zsolt János and Monostori, László
AI-based modelling and optimisation of coupled production processes
Article
2000Monostori, László and Kádár, Botond and Viharos, Zsolt János and Mezgár, István and Stefán, P.
Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems
Conference or Workshop Item
2000Ilie-Zudor, Angyalka Elisabeth and Monostori, László
Environmental and life cycle issues in agent-based manufacturing
Article
2000Monostori, László and Ilie-Zudor, Angyalka Elisabeth
Environmental and life cycle issues in holonic manufacturing
Conference or Workshop Item
2000Bongaerts, L and Monostori, László and Mcfarlane, D and Kádár, Botond Géza
Hierarchy in distributed shop floor control
Article
2000Monostori, László
Intelligent machines
Conference or Workshop Item
2000Mezgár, István and Monostori, László and Kádár, Botond and Egresits, C.
Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)
Book Section
2000Monostori, László and Viharos, Zsolt János
Multipurpose modeling and optimization of production processes and process chains by combining machine learning and search techniques
Article
2000Ilie-Zudor, Angyalka Elisabeth and Monostori, László
New manufacturing paradigms
Book Section
2000Monostori, László and Viharos, Zsolt János
Quality-oriented modelling and optimisation of production processes and process chains
Conference or Workshop Item
2000Stefán, P. and Monostori, László and Pupp, Z.
Reinforcement learning methods in information engineering
Conference or Workshop Item
2000Monostori, László and Viharos, Zsolt János and Markos, Sándor
Satisfying various requirements in different levels and stages of machining using one general ANN-based process model
Article

2001

DateAuthor/TitleDocument Type
2001Kádár, Botond and Monostori, László
Adaptive agents in distributed manufacturing systems
Conference or Workshop Item
2001Ilie-Zudor, E. and Monostori, László
Agent-based support for handling environmental and life-cycle issues
Conference or Workshop Item
2001Kádár, Botond and Monostori, László
Approaches to increase the performance of agent-based production systems
Conference or Workshop Item
2001Kádár, Botond and Monostori, László
Distributed control of manufacturing systems through adaptive agents
Conference or Workshop Item
2001Ueda, K and Márkus, András and Monostori, László and Kals, HJJ and Arai, T
Emergent synthesis methodologies for manufacturing
Article
2001Monostori, László and Viharos, Zsolt János
Hybrid, AI- and simulation-supported optimisation of process chains and production plants
Article
2001Monostori, László
Intelligent manufacturing processes and systems
Conference or Workshop Item
2001Monostori, László
Intelligent techniques for managing complexity, changes and uncertainties in manufacturing
Conference or Workshop Item
2001Monostori, László
Intelligent techniques for quality control and management
Conference or Workshop Item
2001Ilie-Zudor, E. and Monostori, László
Modelling and management of production networks
Conference or Workshop Item
2001Stefán, P. and Monostori, László
On Internet routing problems in dynamically changing environment
Conference or Workshop Item
2001Stefán, P. and Monostori, László
On the relationship between learning capability and the Boltzmann-formula
Conference or Workshop Item
2001Viharos, Zsolt János and Monostori, László
Optimisation of process chains and production plants by using a hybrid, AI- and simulation based approach
Conference or Workshop Item
2001Stefán, P. and Monostori, László and Vaskó, Z.
Quasi-optimal solutions of the travelling salesman's problem in variable environment
Conference or Workshop Item
2001Stefán, P. and Monostori, László and Erdélyi, F.
Reinforcement learning for solving shortest-path and dynamic scheduling problems
Conference or Workshop Item
2001Erdélyi, F. and Horváth, Miklós and Kulcsár, Balázs and Monostori, László and Renner, Gábor and Tóth, T.
Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)
Book Section

2002

DateAuthor/TitleDocument Type
2002Monostori, László
AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing
Conference or Workshop Item
2002Monostori, László
Digital enterprises, production networks
Conference or Workshop Item
2002Monostori, László and Haidegger, Géza and Váncza, József and Viharos, Zsolt János
Digital enterprises: A national R&D project in Hungary
Conference or Workshop Item
2002Monostori, László and Haidegger, Géza and Váncza, József and Viharos, Zsolt János
Digital factories, production networks
Article
2002Monostori, László and Ilie-Zudor, Angyalka Elisabeth
Environmental and life cycle issues in holonic manufacturing
Article
2002Ilie-Zudor, E. and Monostori, László and Kádár, Botond and Cavalieri, S. and Cieminski, G. and Di Mascolo, M. and Campi, A.
Integration of on-line and face-to-face learning at an international platform for teaching and research
Conference or Workshop Item
2002Monostori, László
Intelligent techniques for quality control and management
Article
2002Viharos, Zsolt János and Monostori, László and Novák, K. and Tóth, Gábor András and Kenderesy, T. and Csongrádi, Z. and Koródi, T.
Monitoring parameter based determination of production tolerances
Conference or Workshop Item
2002Viharos, Zsolt János and Monostori, László
Optimisation of production systems by using simulation and artificial intelligence techniques
Conference or Workshop Item
2002Monostori, László and Váncza, József
SZTAKI in PLANET: an introduction
Article
2002Stefán, P. and Monostori, László
Shop-floor scheduling based on reinforcement learning algorithm
Conference or Workshop Item
2002Ilie-Zudor, E. and Monostori, László and Macchi, M. and Kádár, Botond and Kuzmina, E.
Teaching manufacturing systems modelling through simulation in an international platform for education and research
Conference or Workshop Item
2002Viharos, Zsolt János and Monostori, László and Vincze, T.
Training and application of artificial neural networks with incomplete data
Conference or Workshop Item
2002Ilie-Zudor, E. and Kádár, Botond and Monostori, László and Cavalieri, S. and Wiendahl, HP and Cieminski, G. and Di Mascolo, M. and Campi, A. and Santambrogio, N.
Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research
Conference or Workshop Item
2002Cavalieri, S. and Garetti, M. and Macchi, M. and Campi, A. and Collina, F. and Colorni, A. and Locatelli, I. and Longeri, T. and Cieminski, G. and Lopitzsch, J. and Di Mascolo, M. and Frein, Y. and Kádár, Botond and Monostori, László and Ilie-Zudor, E. and Meroni, A. and Santambrogio, N.
Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research
Conference or Workshop Item
2002Ilie-Zudor, E. and Monostori, László
An agent-based approach for production control incorporating environmental and life-cycle issues, together with sensitivity analysis
Conference or Workshop Item
2002Ilie-Zudor, E. and Monostori, László and Wiendahl, HP and Macchi, M. and Longeri, T. and Di Mascolo, M.
An international platform for education and research in the area of modelling of industrial manufacturing systems
Conference or Workshop Item
2002Monostori, László and Kádár, Botond and Csáji, Balázs Csanád
The role of adaptive agents in distributed manufacturing
Conference or Workshop Item

2003

DateAuthor/TitleDocument Type
2003Monostori, László
AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing
Article
2003Kádár, Botond and Monostori, László and Csáji, Balázs Csanád
Adaptive approaches to increasing the performance of production control systems
Conference or Workshop Item
2003Ilie-Zudor, Angyalka Elisabeth and Monostori, László and Kuzmina, E.
Constraint programming based support for production networks management
Conference or Workshop Item
2003Monostori, László and Váncza, József and Márkus, A. and Kádár, Botond and Viharos, Zsolt János
Digital enterprises: first results of a national R&D project
Conference or Workshop Item
2003Pheiffer, A. and Kádár, Botond and Monostori, László
Evaluating and improving production control systems by using emulation
Conference or Workshop Item
2003Csáji, Balázs Csanád and Kádár, Botond and Monostori, László
Improving multi-agent based scheduling by neurodynamic programming
Article
2003Monostori, László
Intelligent manufacturing systems, digital enterprises, production networks: challenges for the scientific & industrial collaboration
Conference or Workshop Item
2003Viharos, Zsolt János and Monostori, László and Novák, K. and Tóth, Gábor András and Koródi, T. and Csongrádi, Z. and Kenderesy, T. and Solymosi, T. and Lorincz, A. and Magai, I. and Fazekas, F.
Monitoring of complex production systems, in view of digital factories
Conference or Workshop Item
2003Kovács, András and Váncza, József and Kádár, Botond Géza and Monostori, László and Pfeiffer, András
Real-life scheduling using constraint programming and simulation
Article
2003Viharos, Zsolt János and Monostori, László and Csongrádi, Z
Realizing the digital factory: monitoring of complex production systems
Article
2003Monostori, László and Váncza, József and Márkus, A. and Kádár, Botond and Viharos, Zsolt János
Towards the realisation of digital enterprises
Conference or Workshop Item
2003Viharos, Zsolt János and Monostori, László and Csongrádi, Z.
An important aspect of a digital factory: monitoring of complex production systems
Conference or Workshop Item

2004

DateAuthor/TitleDocument Type
2004Monostori, László and Csáji, Balázs Csanád and Kádár, Botond Géza
Adaptation and learning in distributed production control
Article
2004Niemann, J. and Ilie-Zudor, E. and Monostori, László and Westkamper, E.
Agent-based product life cycle data support
Conference or Workshop Item
2004Kádár, Botond and Pfeiffer, András and Monostori, László
Discrete event simulation for supporting production planning and scheduling decisions in digital factories
Conference or Workshop Item
2004Monostori, László
Engineering intelligent systems, introduction
Article
2004Csáji, Balázs Csanád and Monostori, László and Kádár, Botond
Learning and cooperation in a distributed market-based production control system
Conference or Workshop Item
2004Viharos, Zsolt János and Monostori, László
Quality-oriented modelling, simulation and management of production lines
Conference or Workshop Item
2004Pfeiffer, András and Kádár, Botond and Monostori, László
Simulation support for rescheduling
Conference or Workshop Item
2004Csáji, Balázs Csanád and Kádár, Botond and Monostori, László and Pfeiffer, András
Simulation supported agent-based adaptive production scheduling
Conference or Workshop Item
2004Pfeiffer, András and Kádár, Botond and Csáji, Balázs Csanád and Monostori, László
Simulation supported analysis of a dynamic rescheduling system
Conference or Workshop Item
2004Kádár, Botond and Pfeiffer, András and Monostori, László
Testing and validation of deterministic schedules in a simulated stochastic environment
Conference or Workshop Item

2005

DateAuthor/TitleDocument Type
2005Kádár, Botond and Csáji, Balázs Csanád and Monostori, László
Adaptive approaches to increasing the performance of production control systems
Article
2005Niemann, J. and Ilie-Zudor, Angyalka Elisabeth and Monostori, László and Westkämper, E.
Agent-based product life cycle data support
Conference or Workshop Item
2005Kádár, Botond and Pfeiffer, András and Monostori, László
Building agent-based systems in a discrete-event simulation environment
Article
2005Ilie-Zudor, Angyalka Elisabeth and Monostori, László
E-learning in the field of supply-chain management on graduate level and within corporations
Conference or Workshop Item
2005Nof, SY and Morel, G. and Monostori, László and Molina, A. and Filip, F.
From plant and logistics control to multi-enterprise collaboration
Conference or Workshop Item
2005Iung, B. and Monostori, László
Manufacturing scheduling and control in the extended enterprise
Conference or Workshop Item
2005Monostori, László and Fornasiero, R. and Váncza, József
Organizing and running real-time, cooperative enterprises
Conference or Workshop Item
2005Monostori, László and Viharos, Zsolt János
Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005
Other
2005Iung, B. and Monostori, László
Production scheduling and control
Conference or Workshop Item
2005Monostori, László and Váncza, József and Márkus, A. and Kis, Tamás and Kovács, András and Erdős, P. and Kádár, Botond and Viharos, Zsolt János
Real-time, cooperative enterprises: management of changes and disturbances on different levels of production
Conference or Workshop Item
2005Pfeiffer, András and Kádár, Botond and Csáji, Balázs Csanád and Monostori, László
Simulation supported analysis of a dynamic rescheduling system
Conference or Workshop Item
2005Csáji, Balázs Csanád and Monostori, László
Stochastic approximate scheduling by neurodynamic learning
Conference or Workshop Item
2005Csáji, Balázs Csanád and Monostori, László
Stochastic reactive production scheduling by multi-agent based asynchronous approximate dynamic programming
Article
2005Monostori, László
Technical monitoring and diagnostics: prerequisite of intelligent, adaptive manufacturing systems
Conference or Workshop Item
2005Ilie-Zudor, Angyalka Elisabeth and Kimmich, J. and Monostori, László
Web-based education on graduate level within corporations in the field of supply-chain management
Conference or Workshop Item
2005Ilie-Zudor, Angyalka Elisabeth and Pinto, R. and Macchi, M. and Monostori, László
eSCM: education on supply-chain management on graduate level and within corporations
Article

2006

DateAuthor/TitleDocument Type
2006Csáji, Balázs Csanád and Monostori, László
Adaptive algorithms in distributed resource allocation
Conference or Workshop Item
2006Csáji, Balázs Csanád and Monostori, László
Adaptive sampling based large-scale stochastic resource control
Conference or Workshop Item
2006Ilie-Zudor, Angyalka Elisabeth and Monostori, László
Agent-based approach for building-up efficient value chain networks
Article
2006Ilie-Zudor, Angyalka Elisabeth and Monostori, László
Agent-based approach for building-up efficient value chain networks
Conference or Workshop Item
2006Monostori, László and Váncza, József and Kumara, S R T
Agent-based systems for manufacturing
Article
2006Viharos, Zsolt János and Monostori, László and Kemény, Zsolt
Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology
Conference or Workshop Item
2006Monostori, László and Ueda, K.
Design of complex adaptive systems: introduction
ISI Article
2006Nof, S Y and Morel, G and Monostori, László and Molina, A and Filip, F
From plant and logistics control to multi-enterprise collaboration
Article
2006Ilie-Zudor, Angyalka Elisabeth and Fraemling, K. and Holstrom, J. and Monostori, László
Identity-based tracking of products and product data in changing networks
Conference or Workshop Item
2006Viharos, Zsolt János and Kádár, Botond and Monostori, László and Kemény, Zsolt and Csáji, Balázs Csanád and Pfeiffer, András and Karnok, Dávid
Integration of production-, quality- and process monitoring for agile manufacturing
Conference or Workshop Item
2006Ilie-Zudor, Angyalka Elisabeth and Kemény, Zsolt and Egri, Péter and Monostori, László
The RFID technology and its current applications
Conference or Workshop Item
2006Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Viharos, Zsolt János
Real-time, cooperative enterprises
Conference or Workshop Item
2006Monostori, László and Váncza, József and Márkus, András and Kis, Tamás and Kovács, András and Erdős, Ferenc Gábor and Kádár, Botond and Viharos, Zsolt János
Real-time, cooperative enterprises: management of changes and disturbances in different levels of production
Article
2006Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Viharos, Zsolt János
Real-time, cooperative enterprises: requirements and solution approaches
Conference or Workshop Item
2006Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Viharos, Zsolt János
Real-time, cooperative enterprises: requirements and solution approaches
Conference or Workshop Item
2006Csáji, Balázs Csanád and Monostori, László and Kádár, Botond Géza
Reinforcement learning in a distributed market-based production control system
Article
2006Karnok, Dávid and Monostori, László and Kádár, Botond
Simulating the interaction between the shop floor personnel and the manufacturing execution system
Conference or Workshop Item
2006Pfeiffer, András and Kádár, Botond and Monostori, László and Karnok, Dávid
Simulation as one of the core technologies for digital enterprises; assessment of hybrid rescheduling methods
Conference or Workshop Item
2006Pfeiffer, András and Kádár, Botond and Monostori, László and Karnok, Dávid
Simulation-based control strategy optimization by using genetic algorithms
Conference or Workshop Item
2006Pfeiffer, András and Kádár, Botond and Monostori, László
Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns
Conference or Workshop Item
2006Pfeiffer, András and Kádár, Botond and Monostori, László
Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns
Article
2006Monostori, László and Csáji, Balázs Csanád
Stochastic dynamic production control by neurodynamic programming
Article
2006Monostori, László and Viharos, Zsolt János
Technical monitoring and diagnostics: indispensable element of intelligent manufacturing systems
Conference or Workshop Item

2007

DateAuthor/TitleDocument Type
2007-11-14Csáji, Balázs Csanád and Monostori, László
Modeling networks of collaborating enterprises as complex systems
Conference or Workshop Item
2007Kemény, Zsolt and Ilie-Zudor, Angyalka Elisabeth and Monostori, László and Szathmári, Marcell Ferenc
AutoID-based track and trace applications in supply-chains - state-of-the-art and envisaged developments
Conference or Workshop Item
2007Viharos, Zsolt János and Monostori, László and Kemény, Zsolt
Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology
Book Section
2007Monostori, László and Iung, B.
Manufacturing scheduling and control in the extended enterprise
Book Section
2007Monostori, László and Fornasiero, R. and Váncza, József
Organizing and running real-time, co-operative enterprises
Book Section
2007Monostori, László and Csáji, Balázs Csanád
Production structures as complex adaptive systems
Conference or Workshop Item
2007Monostori, László and Kis, Tamás and Kádár, Botond and Váncza, József and Erdős, Ferenc Gábor
Real-time, cooperative enterprises for customised mass production
Conference or Workshop Item
2007Monostori, László and Salekovics, István and Váncza, József and Kis, Tamás and Kádár, Botond and Farkas, Zoltán
Real-time, cooperative enterprises: challenges and results of an industry-academia project
Conference or Workshop Item
2007Karnok, Dávid and Kádár, Botond and Monostori, László
Simulating the manufacturing execution system: interactions with the workers and managers
Conference or Workshop Item
2007Kádár, Botond and Pfeiffer, András and Monostori, László
Simulation-based monitoring and validation of production control decisions
Conference or Workshop Item
2007Pfeiffer, András and Kádár, Botond and Monostori, László
Simulation-based validation of production control decisions, subject to resource availability
Conference or Workshop Item
2007Monostori, László and Kádár, Botond Géza and Pfeiffer, András and Karnok, Dávid
Solution approaches to real-time control of customized mass production
Article
2007Monostori, László and Kádár, Botond and Pfeiffer, András and Karnok, Dávid
Solution approaches to real-time control of customized mass production
ISI Article
2007Pfeiffer, András and Kádár, Botond Géza and Monostori, László
Stability-oriented evaluation of rescheduling strategies by using simulation
Article
2007Pfeiffer, András and Kádár, Botond and Monostori, László
Stability-oriented evaluation of rescheduling strategies, by using simulation
ISI Article

2008

DateAuthor/TitleDocument Type
2008Csáji, Balázs Csanád and Monostori, László
Adaptive stochastic resource control: a machine learning approach
ISI Article
2008Nof, S. Y. and Filip, F. G. and Molina, A. and Monostori, László and Pereira, C. E.
Advances in e-manufacturing, e-logistics, and e-service systems
Conference or Workshop Item
2008Monostori, László and Csáji, Balázs Csanád
Complex adaptive systems (CAS) approach to production systems and organisations
Conference or Workshop Item
2008Schuh, G and Monostori, László and Csáji, Balázs Csanád and Döring, S
Complexity-based modeling of reconfigurable collaborations in production industry
Article
2008Karnok, Dávid and Monostori, László
Digital manager: developing a support system for real-time production evaluation
Conference or Workshop Item
2008Ilie-Zudor, Angyalka Elisabeth and Kemény, Zsolt and Monostori, László
Identity-based tracking and Web services for SMEs
Book Section
2008Ilie-Zudor, Angyalka Elisabeth and Szathmári, Marcell Ferenc and Kemény, Zsolt and Karnok, Dávid and Monostori, László
Identity-based, item-centric tracking platform for logistics applications
Conference or Workshop Item
2008Egri, Péter and Csáji, Balázs Csanád and Kemény, Zsolt and Monostori, László and Váncza, József
Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken
Conference or Workshop Item
2008Karnok, Dávid and Monostori, László
Logistics platform: developing a distributed, cooperative production and logistics system
Conference or Workshop Item
2008Monostori, László and Váncza, József and Kis, Tamás and Erdős, Ferenc Gábor and Karnok, Dávid and Egri, Péter
Real-time, cooperative enterprises for customized mass production; challenges and solution approaches
Conference or Workshop Item
2008Pfeiffer, András and Kádár, Botond and Monostori, László and Karnok, Dávid
Simulation as one of the core technologies for digital enterprises: assessment of hybrid rescheduling methods
ISI Article
2008Pfeiffer, András and Kádár, Botond and Monostori, László
Situation detection in production control by applying on-line simulation
Conference or Workshop Item
2008Kemény, Zsolt and Ilie-Zudor, Angyalka Elisabeth and Szathmári, Marcell Ferenc and Monostori, László
TraSer: an open-source solution platform for cross-company transparency in tracking and tracing
Conference or Workshop Item
2008Csáji, Balázs Csanád and Monostori, László
Value function based reinforcement learning in changing Markovian environments
ISI Article
2008Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Karnok, Dávid and Drótos, Márton and Egri, Péter
Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei
Article
2008Csáji, Balázs Csanád and Monostori, László
A complexity model for networks of collaborating enterprises
Conference or Workshop Item
2008Váncza, József and Egri, Péter and Monostori, László
A coordination mechanism for rolling Horizon planning in supply networks
Article
2008Kemény, Zsolt and Ilie-Zudor, Angyalka Elisabeth and Szathmári, Marcell Ferenc and Monostori, László and Langius, Erik A. F.
A low-cost perspective in identifier-based services of supply chains
Conference or Workshop Item

2009

DateAuthor/TitleDocument Type
2009-06-05Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Erdős, Ferenc Gábor and Karnok, Dávid and Egri, Péter
Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper
Conference or Workshop Item
2009Monostori, László and Viharos, Zsolt János and Erdős, Ferenc Gábor and Kovács, András
AI supported maintenance and reliability system in wind energy production
Conference or Workshop Item
2009Csáji, Balázs Csanád and Monostori, László
Adaptive approaches to distributed resource allocation
Article
2009Ilie-Zudor, Angyalka Elisabeth and Monostori, László
Agent-based framework for pre-contractual evaluation of participants in project-delivery supply-chains
ISI Article
2009Kemény, Zsolt and Ilie-Zudor, Angyalka Elisabeth and Monostori, László
From tracking operations to IOT - The small business perspective
Conference or Workshop Item
2009Monostori, László and Ilie Zudor, Angyalka and Kemény, Zsolt and Szathmári, Marcell and Karnok, Dávid
Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size
Article
2009Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond Géza and Erdős, Ferenc Gábor and Karnok, Dávid and Egri, Péter
Novel IT approaches and solutions towards real-time, cooperative enterprises
Article
2009Karnok, Dávid and Monostori, László
Novel approaches for better transparency in production and supply chains
Article
2009Karnok, Dávid and Monostori, László
Novel approaches for better transparency in production and supply chains
Conference or Workshop Item
2009Monostori, László and Kis, Tamás and Váncza, József and Kádár, Botond and Erdős, Ferenc Gábor
Real-time, cooperative enterprises for customised mass production
ISI Article
2009Monostori, László and Váncza, József and Kis, Tamás and Kádár, Botond and Karnok, Dávid and Drótos, Márton and Egri, Péter
Real-time, cooperative enterprises: Results of an industry - academia project
Article
2009Pfeiffer, András and Kádár, Botond and Szathmári, Marcell Ferenc and Popovics, Gergely and Vén, Zoltán and Monostori, László
Self-building simulation tool for daily decision support in production control
Conference or Workshop Item
2009Ueda, K and Takenaka, T and Váncza, József and Monostori, László
Value creation and decision-making in sustainable society
Article

2010

DateAuthor/TitleDocument Type
2010-05-26Karnok, Dávid and Monostori, László
Routing model refinement in large-scale manufacturing environment by using data mining
Conference or Workshop Item
2010-05-25Viharos, Zsolt János and Erdős, Ferenc Gábor and Kovács, András and Monostori, László
Artificial intelligence applications for maintenance oriented health monitoring of wind turbines
Conference or Workshop Item
2010-05-25Dorronsoro, Pablo and Monostori, László
Market power analysis for varied concentration in a first-price auction based multiagent supply chain
Conference or Workshop Item
2010-05-25Karnok, Dávid and Monostori, László
Novel approaches for better transparency in large-scale manufacturing environment by using process mining
Conference or Workshop Item
2010-04-20Viharos, Zsolt János and Monostori, László and Erdős, Ferenc Gábor and Kovács, András
AI supported maintenance and reliability system in wind energy production
Conference or Workshop Item
2010-04-15Pfeiffer, András and Kádár, Botond and Monostori, László
Simulation supported situation detection for real-time production control
Conference or Workshop Item
2010Monostori, László and Erdős, Ferenc Gábor and Kádár, Botond Géza and Kis, Tamás and Kovács, András and Pfeiffer, András and Váncza, József
Digital enterprise solution for integrated production planning and control
Article
2010Kádár, Botond Géza and Lengyel, A and Monostori, László and Suginishi, Y and Pfeiffer, András
Enhanced control of complex production structures by tight coupling of the digital and the physical worlds
Article
2010Monostori, László and Csáji, Balázs Csanád and Kádár, Botond Géza and Pfeiffer, András and Ilie Zudor, Angyalka and Kemény, Zsolt and Szathmári, Marcell Ferenc
Towards adaptive and digital manufacturing
Article

2011

DateAuthor/TitleDocument Type
2011-05-25Váncza, József and Monostori, László
Eco-labelling for sustainable manufacturing. (Abstract)
Conference or Workshop Item
2011-05-25Viharos, Zsolt János and Monostori, László and Schmitt, R. and Glöckner, H. and Stiller, S. and Markos, S.
Quantifiable closed quality control (QC2)
Conference or Workshop Item
2011Kádár, Botond Géza and Pfeiffer, András and Monostori, László and Popovics, Gergely and Vén, Zoltán
Co-analysing situations and production control rules in a large-scale manufacturing environment
Conference or Workshop Item
2011Váncza, József and Monostori, László and Lutters, D and Kumara, S R and Tseng, M
Cooperative and responsive manufacturing enterprises
Article
2011Schmitt, R and Glöckner, H and Stiller, S and Monostori, László and Viharos, Zsolt János
Designing closed quality control loops for stable production systems
Conference or Workshop Item
2011Karnok, Dávid and Monostori, László
Determination of routings and process time information from event logs
Conference or Workshop Item
2011Ilie Zudor, Angyalka and Macchi, M and Monostori, László and Scotti, S and Kemény, Zsolt
Engineering education on supply-chain management for students and for employees in industry
ISI Article
2011Karnok, Dávid and Monostori, László
Extracting process time information from large-scale noisy manufacturing event logs
Conference or Workshop Item
2011Monostori, László and Váncza, József
How transparency can increase performance of production: Novel approaches and solutions (Abstract)
Conference or Workshop Item
2011Monostori, László and Ilie Zudor, Angyalka and Kádár, Botond Géza and Karnok, Dávid and Pfeiffer, András and Kemény, Zsolt and Szathmári, Marcell
Novel IT solutions for increasing transparency in production and in supply chains
Conference or Workshop Item
2011Popovics, Gergely and Pfeiffer, András and Kádár, Botond Géza and Vén, Zoltán and Monostori, László
PLC code processing for automatic simulation model generation
Conference or Workshop Item
2011Viharos, Zsolt János and Monostori, László and Schmitt, R and Glöckner, H and Stiller, S and Markos, S
Quantifiable closed quality control (QC2).
Conference or Workshop Item
2011Kovács, András and Erdős, Ferenc Gábor and Monostori, László and Viharos, Zsolt János
Scheduling the maintenance of wind farms for minimizing production loss
Conference or Workshop Item
2011Popovics, Gergely and Pfeiffer, András and Kádár, Botond Géza and Monostori, László
Simulation-based evaluation of production control decisions in large-scale manufacturing
Conference or Workshop Item
2011Kovács, András and Csempesz, János and Erdős, Ferenc Gábor and Karnok, Dávid and Kemény, Lőrinc and Monostori, László and Viharos, Zsolt János
WindMT: An integrated system for failure detection and maintenance scheduling at wind farms
Conference or Workshop Item
2011Vén, Zoltán and Popovics, Gergely and Pfeiffer, András and Monostori, László
Újrakonfigurálható gyártórendszerek rugalmassági mutatója
Conference or Workshop Item
2011Ilie Zudor, Angyalka and Kemény, Zsolt and van, Blommestein F and Monostori, László and van, der Meulen A
A survey of applications and requirements of unique identification systems and RFID techniques
Article
2011Kovács, András and Erdős, Ferenc Gábor and Viharos, Zsolt János and Monostori, László
A system for the detailed scheduling of wind farm maintenance
Article

2012

DateAuthor/TitleDocument Type
2012Pfeiffer, András and Kádár, Botond Géza and Popovics, Gergely and Kardos, Csaba and Vén, Zoltán and Kemény, Lőrinc and Monostori, László
Applying model-reconstruction by exploring MES and PLC data for simulation support of production systems
Conference or Workshop Item
2012Popovics, Gergely and Pfeiffer, András and Kádár, Botond Géza and Vén, Zoltán and Kemény, Zsolt and Monostori, László
Automatic simulation model generation based on PLC codes and MES stored data
Article
2012Popovics, Gergely and Kardos, Csaba and Pfeiffer, András and Kádár, Botond Géza and Vén, Zoltán and Monostori, László
Automatic simulation model generation supported by data stored in low level controllers
Conference or Workshop Item
2012ElMaraghy, W and ElMaraghy, H and Tomiyama, T and Monostori, László
Complexity in engineering design and manufacturing
Article
2012Schmitt, R and Monostori, László and Glöckner, H and Viharos, Zsolt János
Design and assessment of quality control loops for stable business processes
Article
2012Kádár, Botond Géza and Pfeiffer, András and Monostori, László
Execution data connected simulation for production operation planning and control
Conference or Workshop Item
2012Gyulai, Dávid and Vén, Zoltán and Pfeiffer, András and Váncza, József and Monostori, László
Matching Demand and System Structure in Reconfigurable Assembly Systems
Article
2012Viharos, Zsolt János and Monostori, László and Csempesz, János and Schmitt, R and Glöckner, H and Stiller, S and Markos, S
QC2 Loop Editor: The Metholology and the Tool for Closing Quality Loops of Manufacturing Enterprises
Conference or Workshop Item
2012Popovics, Gergely and Kardos, Csaba and Kemény, Lőrinc and Gyulai, Dávid and Monostori, László
Uniform data structure for production simulation
Conference or Workshop Item

2013

DateAuthor/TitleDocument Type
2013Nonaka, Y and Erdős, Ferenc Gábor and Kis, Tamás and Kovács, András and Monostori, László and Nakano, T and Váncza, József
Generating alternative process plans for complex parts
ISI Article
2013Popovics, Gergely and Monostori, László
ISA standard simulation model generation supported by data stored in low level controllers
Article
2013Kardos, Csaba and Popovics, Gergely and Kádár, Botond Géza and Monostori, László
Methodology and data-structure for a uniform system’s specification in a simulation project
Article
2013Gyulai, Dávid and Monostori, László
Vehicle Routing Approach for Lean Shop-Floor Logistics
Article
2013Gyulai, Dávid and Monostori, László
A local-search-based solution for milkrun logistics optimization
Conference or Workshop Item
2013Ilie Zudor, Angyalka and Kemény, Zsolt and Szathmári, Marcell and Monostori, László
The role of OSC-based projects in meeting new challenges of education - concept and exemplification
ISI Article

2014

DateAuthor/TitleDocument Type
2014Monostori, László
Artificial Intelligence
Book Section
2014Gyulai, Dávid and Kádár, Botond and Monostori, László
Capacity Planning and Resource Allocation in Assembly Systems Consisting of Dedicated and Reconfigurable Lines
Article
2014Gyulai, Dávid and Pfeiffer, András and Kádár, Botond and Monostori, László
Capacity analysis and planning for flexible assembly lines
Book Section
2014Gyulai, Dávid and Kádár, Botond and Kovács, András and Monostori, László
Capacity management for assembly systems with dedicated and reconfigurable resources
Article
2014Monostori, László and Valckenaers, P and Dolgui, A and Panetto, H and Brdys, M and Csáji, Balázs Csanád
Cooperative Control in Production and Logistics
Book Section
2014Monostori, László
Cyber-physical production systems: Roots, expectations and R&D challenges
Article
2014Karnok, Dávid and Kemény, Zsolt and Ilie-Zudor, Angyalka Elisabeth and Monostori, László
Data type definition and handling for supporting interoperability across organizational borders
Article
2014Kemény, Zsolt and Bozóki, Sándor and Ilie Zudor, Angyalka and Monostori, László
Low-cost Extension of Information Transparency Throughout the Product Life-cycle via Optical Identification and Quality Indication
Article
2014Ilie Zudor, Angyalka and Kemény, Zsolt and Ekárt, Anikó and Buckingham, Christopher D. and Monostori, László
A Solution for Information Management in Logistics Operations of Modern Manufacturing Chains
Article

2015

DateAuthor/TitleDocument Type
2015Ilie Zudor, Angyalka and Ekárt, Anikó and Kemény, Zsolt and Buckingham, Christopher D. and Welch, Philip and Monostori, László
Advanced predictive-analysis-based decision support for collaborative logistics networks
Article
2015Monostori, László and Valckenaers, P and Dolgui, A and Panetto, H and Brdys, M and Csáji, Balázs Csanád
Cooperative control in production and logistics
Article
2015Monostori, László
Cyber-physical production systems: Roots from manufacturing science and technology
Article
2015Gyulai, Dávid and Kádár, Botond and Monostori, László
Robust production planning and capacity control for flexible assembly lines
Article
2015Stricker, N and Pfeiffer, András and Moser, E and Kádár, Botond and Lanza, G and Monostori, László
Supporting multi-level and robust production planning and execution
Article

2016

DateAuthor/TitleDocument Type
2016Kemény, Zsolt and Nacsa, János and Erdős, Ferenc Gábor and Glawar, R and Sihn, W and Monostori, László and Ilie Zudor, Angyalka
Complementary research and education opportunities – a comparison of learning factory facilities and methodologies at TU Wien and MTA SZTAKI
Article
2016Monostori, László and Kádár, Botond and Bauernhansl, T and Kondoh, S and Kumara, S
Cyber-physical systems in manufacturing
Article
2016Karnok, Dávid and Kemény, Zsolt and Ilie Zudor, Angyalka and Monostori, László
Data type definition and handling for supporting interoperability across organizational borders
Article
2016Colledani, M and Gyulai, Dávid and Monostori, László and Urgo, M and Unglert, J
Design and management of reconfigurable assembly lines in the automotive industry
Article
2016Popovics, Gergely and Pfeiffer, András and Monostori, László
Generic data structure and validation methodology for simulation of manufacturing systems
Article
2016Pfeiffer, András and Gyulai, Dávid and Kádár, Botond and Monostori, László
Manufacturing Lead Time Estimation with the Combination of Simulation and Statistical Learning Methods
Article
2016Egri, Péter and Gyulai, Dávid and Kádár, Botond and Monostori, László
Production Planning on Supply Network and Plant Levels: The RobustPlaNet Approach
Article
2016Gyulai, Dávid and Pfeiffer, András and Kádár, Botond and Monostori, László
Simulation-based Production Planning and Execution Control for Reconfigurable Assembly Cells
Article
2016Popovics, Gergely and Monostori, László
An approach to Determine Simulation Model Complexity
Article

2017

DateAuthor/TitleDocument Type
2017Patra, K and Jha, AK and Szalay, Tibor and Ranjan, J and Monostori, László
Artificial neural network based tool condition monitoring in micro mechanical peck drilling using thrust force signals
Article
2017Gyulai, Dávid and Monostori, László
Capacity management of modular assembly systems
Article
2017Váncza, József and Monostori, László
Cyber-physical Manufacturing in the Light of Professor Kanji Ueda's Legacy
Article
2017Ilie Zudor, Angyalka and Kemény, Zsolt and Pfeiffer, András and Monostori, László
Decision support solutions for factory and network logistics operations
Article
2017Pfeiffer, András and Gyulai, Dávid and Monostori, László
Improving the Accuracy of Cycle Time Estimation for Simulation in Volatile Manufacturing Execution Environments
Book Section
2017Gyulai, Dávid and Pfeiffer, András and Monostori, László
Robust production planning and control for multi-stage systems with flexible final assembly lines
Article
2017Gyulai, Dávid and Kádár, Botond and Monostori, László
Scheduling and Operator Control in Reconfigurable Assembly Systems
Article

2018

DateAuthor/TitleDocument Type
2018Byrne, G and Dimitrov, D and Monostori, László and Teti, R and van, Houten F
Biologicalisation: Biological transformation in manufacturing
Article
2018Monostori, László and Kádár, Botond and Nick, Gábor András and Pfeiffer, András and Várgedő, T
Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Book Section
2018Gyulai, Dávid and Pfeiffer, András and Nick, Gábor András and Gallina, V and Sihn, W and Monostori, László
Lead time prediction in a flow-shop environment with analytical and machine learning approaches
Article
2018Lingitz, L and Gallina, V and Ansari, F and Gyulai, Dávid and Pfeiffer, András and Monostori, László
Lead time prediction using machine learning algorithms: A case study by a semiconductor manufacturer
Article
2018Pfeiffer, András and Gyulai, Dávid and Szaller, Ádám and Monostori, László
Production Log Data Analysis for Reject Rate Prediction and Workload Estimation
Book Section
2018Tsutsumi, D and Gyulai, Dávid and Kovács, András and Tipary, Bence and Ueno, Y and Monostori, László
Towards joint optimization of product design, process planning and production planning in multi-product assembly
Article
2018Manzini, M and Unglert, J and Gyulai, Dávid and Colledani, M and Jauregui-Becker, J M and Monostori, László
An integrated framework for design, management and operation of reconfigurable assembly systems
Article

2020

DateAuthor/TitleDocument Type
2020Egri, Péter and Csáji, Balázs Csanád and Kis, Krisztián Balázs and Monostori, László and Váncza, József
Bio-inspired control of automated stem cell production
Article
2020Monostori, László and Váncza, József
Lessons learned from the COVID-19 pandemic and their possible consequences on manufacturing
Article
2020Monostori, László and Váncza, József
Towards living manufacturing systems
Article

2021

DateAuthor/TitleDocument Type
2021Monostori, László and Csáji, Balázs Csanád and Egri, Péter and Kis, Krisztián Balázs and Váncza, József
Automated stem cell production by bio-inspired control
Article
2021Byrne, G and Monostori, László
Biologicalisation for sustainable and competitive manufacturing – Editorial
Article
2021ElMaraghy, W and Schuh, G and Monostori, László and ElMaraghy, H
Evolution and future of manufacturing systems
Article
2021Monostori, László and Csáji, Balázs Csanád and Egri, Péter and Kis, Krisztián Balázs and Váncza, József
Reprint of: Automated stem cell production by bio-inspired control
Article
2021Byrne, G and Damm, O and Monostori, László and Teti, R and van, Houten F
Towards high performance living manufacturing systems ‒ A new convergence between biology and engineering
Article

2023

DateAuthor/TitleDocument Type
2023Wegener, K and Damm, O and Harst, S and Ihlenfeldt, S and Monostori, László
Biologicalisation in manufacturing – Current state and future trends
Article
2023Tolio, T A M and Monostori, László and Váncza, József and Sauer, O
Platform-based manufacturing
Article
This list was generated on Fri Mar 29 03:12:09 2024 CET.