Items where Author is "Kovács, György"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Item Type | No Grouping
Number of items: 260.

1992

DateAuthor/TitleDocument Type
1992Kovács, György and Mezgár, István and Szelke, E.
Application of concurrent engineering in design for one-of-a-kind production
Conference or Workshop Item
1992Létray, Z. and Kopácsi, Sándor and Kovács, György
Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems
Conference or Workshop Item
1992Molina, A. and Mezgár, István and Kovács, György
Concurrent engineering approach to FMS design using a blackboard architecture
Conference or Workshop Item
1992Kovács, György and Mezgár, István
Concurrent engineering: a way to design intelligent manufacturing systems
Conference or Workshop Item
1992Kovács, György and Mezgár, István and Silva, M. and Di Cesare, F. and Desrochers, AA
Concurrent product/production system design and Petri Nets in automated manufacturing systems
Conference or Workshop Item
1992Molina, A. and Mezgár, István and Kovács, György
Cooperative hybrid expert systems for concurrent design of FMS
Conference or Workshop Item
1992Ruiz, GH and Mazzotti, CG and Kovács, György and Haidegger, Géza
Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria
Conference or Workshop Item
1992Ruiz, GH and Mazzotti, CG and Kovács, György
Design of a machine tool monitoring system
Conference or Workshop Item
1992Molina, A. and Mezgár, István and Kovács, György
FMS design based on concurrent engineering: a blackboard architecture approach
Conference or Workshop Item
1992Kovács, György and Haidegger, Géza and Nacsa, János
First experiences with a MAP-networked CIM pilot plant
Conference or Workshop Item
1992Molina, A. and Mezgár, István and Kovács, György
Konkurrens RGYR tervezés blackboard arhitektúrájú keretrendszerrel
Article
1992Nacsa, János and Haidegger, Géza and Kovács, György
MAP Training Center as a test-bed for OSI products in manufacturing
Conference or Workshop Item
1992Nacsa, János and Haidegger, Géza and Kovács, György
OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban
Article
1992Molina, A. and Mezgár, István and Kovács, György
Object knowledge representation models for concurrent design for FMS
Conference or Workshop Item
1992Kovács, György and Mezgár, István and Szelke, E. and Girnt, M.
One-of-a-kind production - a concurrent engineering approach
Conference or Workshop Item
1992Kovács, György
Pilot plants to assist FMS/CIM evaluation, design and industrial applications
Article
1992Kovács, György and Mezgár, István and Kopácsi, Sándor
A Prolog based manufacturing cell design system
Conference or Workshop Item

1993

DateAuthor/TitleDocument Type
1993Kovács, György and Mezgár, István and Kopácsi, Sándor and Gavalcová, D. and Nacsa, János
Application of expert and traditional program systems for FMS simulation, scheduling and control
Conference or Workshop Item
1993Mezgár, István and Kovács, György
CE approach to quality assurance of products and production systems
Conference or Workshop Item
1993Mezgár, István and Kovács, György and Vészi, A.
CIM reference model based FMS design with concurrent engineering approach
Conference or Workshop Item
1993Kovács, György and Mezgár, István and Vészi, A.
CIM reference model based FMS design with concurrent engineering approach
Conference or Workshop Item
1993Kovács, György
A CS-PROLOG based expert system for manufacturing cell design, simulation and animation
Conference or Workshop Item
1993Kovács, György
Combining AI means and traditional programming to solve some problems of FMS simulation, scheduling and control
Conference or Workshop Item
1993Kovács, György and Mezgár, István and Vishwanadham, N.
Concurrent engineering approach and application of AI to manufacturing
Conference or Workshop Item
1993Ettlie, JE and Dreher, G. and Kovács, György and Trygg, L.
Cross-national comparisons of product development in manufacturing
Article
1993Mezgár, István and Kovács, György
Hybrid systems for CIM components' configuration/reconfiguration
Conference or Workshop Item
1993Mezgár, István and Kovács, György
Hybrid systems for CIM components' configuration/reconfiguration
Conference or Workshop Item
1993Kovács, György and Mezgár, István and Kopácsi, Sándor and Gavalcová, D. and Nacsa, János
Integrated application of real-time expert systems for FMS evaluation and control
Conference or Workshop Item
1993Kovács, György and Mezgár, István
KB simulation and CE approach to assist in quality assurance of products and production systems
Conference or Workshop Item
1993Kopácsi, Sándor and Kovács, György
Knowledge based hybrid simulation of FMS
Conference or Workshop Item
1993Mezgár, István and Kovács, György
Parallel quality assurance of products and production systems using the CE approach
Conference or Workshop Item
1993Kovács, György and Haidegger, Géza and Nacsa, János and Nagy, G.
Plans of the MAP training centre in Budapest
Conference or Workshop Item
1993Kovács, György and Mezgár, István and Kopácsi, Sándor and Gavalcová, D.
Tudásalapú gyártórendszer-szimuláció és -termelésütemezés
Conference or Workshop Item
1993Kopácsi, Sándor and Kovács, György
A knowledge based simulation system for flexible manufacturing
Conference or Workshop Item

1994

DateAuthor/TitleDocument Type
1994Kovács, György and Mezgár, István and Kopácsi, Sándor and Gavalcová, D.
Application of artificial intelligence to problems in advanced manufacturing systems
Article
1994Kovács, György
Application of expert systems to solve some problems of advanced manufacturing systems
Conference or Workshop Item
1994Nacsa, János and Kovács, György
Communication problems of expert systems in manufacturing environment
Conference or Workshop Item
1994Kovács, György and Mezgár, István and Nacsa, János
Concurrent engineering approach to support CIM reference model-based FMS design
Article
1994Ettlie, JE and Dreher, CL and Kovács, György and Trygg, L.
Cross-National comparisons of product development in manufacturing
Book Section
1994Kovács, György and Nagy, G. and Gavalcova, D. and Nacsa, János
Interfacing G2 expert system shell with MMS protocol
Conference or Workshop Item
1994Mezgár, István and Gavalcová, D. and Kovács, György
Possibilities of quality asssurance in a virtual manufacturing environment
Conference or Workshop Item
1994Kovács, György
Some aspects of knowledge based simulation and control of flexible manufacturing systems
Conference or Workshop Item
1994Nacsa, János and Kovács, György
Steps towards real-time control using knowledge based simulation of flexible manufacturing systems
Conference or Workshop Item
1994Kovács, György and Mezgár, István and Kopácsi, Sándor and Nacsa, János and Groumpos, P.
A hybrid simulation-scheduler-quality control system for FMS
Conference or Workshop Item
1994Kovács, György and Mezgár, István and Nacsa, János and Kopácsi, Sándor and Gavalcová, D.
A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems
Conference or Workshop Item
1994Kovács, György and Mezgár, István and Kopácsi, Sándor
A hybrid simulation-scheduler-quality control system
Conference or Workshop Item
1994Kovács, György and Mezgár, István and Nacsa, János and Kopácsi, Sándor and Gavalcová, D.
A knowledge based and a hybrid simulation-scheduling system
Conference or Workshop Item
1994Kovács, György and Nacsa, János and Gavalcová, D.
A knowledge based and a hybrid system to evaluate flexible manufacturing systems
Conference or Workshop Item
1994Kopácsi, Sándor and Nacsa, János and Kovács, György
A knowledge based hybrid system to evaluate flexible manufacturing systems
Conference or Workshop Item
1994Kovács, György
A simulation-scheduling system using hybrid technology
Conference or Workshop Item

1995

DateAuthor/TitleDocument Type
1995Weck, M. and Peper, S. and Kovács, György and Nacsa, János and Szilvásy, A. and Vonderviszt, L.
CAD/CAM integration of an arc welding cell for one-of-a-kind production
Conference or Workshop Item
1995Kovács, György
Changing paradigms in manufacturing automation. Survey paper
Conference or Workshop Item
1995Kovács, György
Computer aided design/computer aided manufacturing
Book Section
1995Kovács, György and Haidegger, Géza
Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában
Article
1995Kovács, György
Intelligent control of FMS - open communications
Article
1995Kovács, György and Nacsa, János
Knowledge based control and open communication of advanced manufacturing systems
Conference or Workshop Item
1995Kovács, György and Nacsa, János
Knowledge based control of manufacturing systems using open communication
Conference or Workshop Item
1995Haidegger, Géza and Kovács, György
Open systems in manufacturing
Conference or Workshop Item
1995Kovács, György and Nacsa, János
Open systems in manufacturing, European and world-wide harmonized initiatives
Conference or Workshop Item
1995Nacsa, János and Kovács, György
A PC-based OSI system to assist robotized welding
Conference or Workshop Item
1995Nacsa, János and Kovács, György and Weck, M. and Peper, S. and Szilvásy, A. and Vonderviszt, L.
A PC-based offline programming system to assist robotized welding
Conference or Workshop Item
1995Mezgár, István and Kovács, György
Problems of products' and production systems' quality
Conference or Workshop Item
1995Varga, EI and Kovács, György and Jörgensen, SB and Hangos, Katalin
Robust analysis of distillation column dynamics
Conference or Workshop Item
1995Nacsa, János and Kovács, György
Some problems of knowledge based control of manufacturing systems using open communication
Conference or Workshop Item
1995Kovács, György and Nacsa, János
Towards intelligent and open control of manufacturing systems
Conference or Workshop Item
1995Kovács, György and Varga, EI and Hangos, Katalin
The relation between u and l1 robust analysis results
Conference or Workshop Item
1995Nacsa, János and Kovács, György
A system to assist robotized welding for SME's
Conference or Workshop Item

1996

DateAuthor/TitleDocument Type
1996Kovács, György
AI in manufacturing: application to FMS simulation, scheduling and control
Book Section
1996Kovács, György and Nacsa, János
Application of knowledge based control for an integrated robotized CAD/CAM arc welding system
Conference or Workshop Item
1996Kovács, György
Changing paradigms in manufacturing automation
Conference or Workshop Item
1996Kopácsi, Sándor and Kovács, György and Gavalcová, D. and Kmecs, I.
Creating reusable assets from simulation models of flexible manufacturing systems
Conference or Workshop Item
1996Kovács, György and Kopácsi, Sándor and Kmecs, I.
Design of flexible manufacturing systems with reuse in a KB simulation environment
Conference or Workshop Item
1996Kovács, György and Kopácsi, Sándor and Kmecs, I.
Design of flexible manufacturing systems with reuse in a KB simulation environment
Conference or Workshop Item
1996Kovács, György and Nacsa, János and Haidegger, Géza
Intelligent control of manufacturing systems using open communications
Conference or Workshop Item
1996Kovács, György
Mechatronikai K+F a SZTAKI CIM Laborjában
Conference or Workshop Item
1996Athans, M. and Bokor, József and Kovács, György and Szabó, Zoltán
Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.)
Book
1996Kovács, György and Nacsa, János and Lepsényi, I.
Organisation and technology management issues of joint European projects in a factory and in a research institute
Conference or Workshop Item
1996Kopácsi, Sándor and Kovács, György and Gavalcová, D. and Kmecs, I.
Reuse in a simulation environment for flexible manufacturing systems
Article
1996Succi, G. and Valerio, O. and Vernazza, T. and Kovács, György
SSQL, a set based logic query for a distributed software repository
Article
1996Kovács, György and Nacsa, János
Some communication problems of KB controlled manufacturing systems
Conference or Workshop Item
1996Kovács, György and Gavalcová, D.
Some experiments with a knowledge based simulator-scheduler
Conference or Workshop Item
1996Mezgár, István and Egresits, CS and Monostori, László and Kovács, György
A coupled system for re-engineering of robust manufacturing system configurations
Conference or Workshop Item
1996Nacsa, János and Kovács, György
An integrated CAD/CAM system for robotized arc welding
Conference or Workshop Item

1997

DateAuthor/TitleDocument Type
1997Kovács, György
AI in manufacturing: application to FMS simulation, scheduling and control
Book Section
1997Kopácsi, Sándor and Kovács, György and Kmecs, I. and Groumpos, PP
Application of software reuse and object oriented methodologies for the modeling of manufacturing systems
Conference or Workshop Item
1997Kopácsi, Sándor and Kovács, György and Kmecs, I. and Groumpos, M.
Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems
Book Section
1997Soumelidis, Alexandros and Kovács, György and Bokor, József and Gáspár, Péter and Palkovics, László and Gianone, L.
Automatic detection of the lane departure of vehicles
Conference or Workshop Item
1997Kopácsi, Sándor and Kovács, György
Co-operative knowledge processing in software reuse
Article
1997Mezgár, István and Kovács, György
Co-operative production planning for SMEs'
Conference or Workshop Item
1997Mezgár, István and Kovács, György
Co-ordination of SMEs' production through a co-operative network
Conference or Workshop Item
1997Kovács, György and Kopácsi, Sándor and Kmecs, I.
Design of flexible manufacturing systems with reuse in a KB simulation environment
Conference or Workshop Item
1997Kovács, György
Experiments with a knowledge-based simulator and scheduler system
Conference or Workshop Item
1997Groumpos, PP and Troupis, DG and Kovács, György
Knowledge representation and processing in a two-level supervisory industrial environment
Conference or Workshop Item
1997Kovács, György and Mezgár, István and Haidegger, Géza
Multimedia design network for manufacturing systems management
Conference or Workshop Item
1997Haidegger, Géza and Kovács, György
Multimedia requirements for management and control of manufacturing systems
Conference or Workshop Item
1997Kovács, György and Nacsa, János and Lepsényi, I.
Organization and technology management issues of joint European projects in a factory and in a research institute
Article
1997Kovács, György and Kopácsi, Sándor and Kmecs, I.
Simulation of FMS with application of reuse and object-oriented technology
Conference or Workshop Item
1997Kovács, György
Software reuse and standardization for SMEs - the CIM-EXP perspective
Article
1997Kovács, György and Nacsa, János
Some communication problems of KB-controlled manufacturing systems
Article
1997Groumpos, PP and Kovács, György
Some modeling, simulation and control problems of advanced manufacturing systems
Conference or Workshop Item
1997Erdélyi, F. and Kovács, György and Haidegger, Géza and Hermann, GY
Számítógépes gyártásirányítás
Book Section
1997Kovács, György and Mezgár, István
Termelő és szolgáltató rendszerek számítógépes tervezése és szimulációja
Book Section
1997Kovács, György and Mezgár, István and Kopácsi, Sándor
An intelligent design network for manufacturing systems' cooperation
Conference or Workshop Item
1997Kovács, György and Mezgár, István
An intelligent planning network for manufacturing systems management
Conference or Workshop Item
1997Kovács, György and Mezgár, István and Haidegger, Géza
A multimedia design network for manufacturing systems' management
Conference or Workshop Item
1997Mezgár, István and Kovács, György
A network-based manufacturing management system
Conference or Workshop Item
1997Haidegger, Géza and Kovács, György and Mezgár, István and Tóth, T.
A vállalat egészét átfogó informatikai rendszer koncepciója
Book Section

1998

DateAuthor/TitleDocument Type
1998Kovács, György
Artificial intelligence techniques to design robotic systems
Conference or Workshop Item
1998Táncos, A. and Kovács, György and Bokor, József
Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.)
Book
1998Mezgár, István and Kovács, György
Co-ordination of SME production through a cooperative network
Article
1998Kovács, György
Gyártórendszerek szimulációjának, tervezésének és üzemeltetésének néhány problémája
Thesis
1998Kovács, György
Harmonizing research and teaching activities in a dedicated research laboratory - Is it a real conflict?
Conference or Workshop Item
1998Nacsa, János and Haidegger, Géza and Kovács, György
Intelligent control applications of open CNCs using G2
Conference or Workshop Item
1998Nacsa, János and Haidegger, Géza and Kovács, György
Intelligent control applications of open CNCs using G2
Conference or Workshop Item
1998Haidegger, Géza and Kovács, György and Kopácsi, Sándor
Interactive multimedia applications at the shop floor
Conference or Workshop Item
1998Kovács, György and Bokor, József and Palkovics, László and Gianone, L. and Semsey, and Széll, L.
Lane-departure detection andcontrol system for commercial vehicles
Conference or Workshop Item
1998Kovács, György and Mezgár, István and Haidegger, Géza
Multimedia applications in a virtual enterprise of SME-s
Conference or Workshop Item
1998Kovács, György and Hangos, Katalin
Notes on ? and 1 1 robustness tests
Article
1998Mezgár, István and Kovács, György
PLENT: a European project on SME co-operation
Book Section
1998Kovács, György and Nacsa, János
Simulation and control of FMS with application of expert systems
Conference or Workshop Item
1998Kovács, György
Some artificial intelligent techniques to design robotic systems
Book Section
1998Kovács, György
Teaching in a dedicated research laboratory - is it a real conflict?
Conference or Workshop Item
1998Kovács, György and Bokor, József and Palkovics, László and Gianone, L. and Semsey, and Széll, L.
Vision system for lane-departure prevention of vehicles
Conference or Workshop Item
1998Kovács, György and Mezgár, István
A distributed planning network for manufacturing systems management
Conference or Workshop Item
1998Mezgár, István and Kovács, György
A virtual enterprise architecture for SMEs
Article

1999

DateAuthor/TitleDocument Type
1999Kovács, György
Application of AI tools and methods in robotics
Conference or Workshop Item
1999Kovács, György and Jaccucci, G. and Lo Surdo, A. and Mambella, E. and Ronchetti, M. and Succi, G. and Uhrik, C. and Cardino, G.
Application of an object repository as an example of cooperative knowledge processing
Book Section
1999Kovács, György and Kopácsi, Sándor and Nacsa, János and Haidegger, Géza and Groumpos, P.
Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems
Article
1999Kovács, György
Computational, AI, and multiagent techniques for design of robotics systems
Book Section
1999Kovács, György and Kopácsi, Sándor and Paganelli, P.
Distributed processing of complex logistics flows
Conference or Workshop Item
1999Kovács, György and Paganelli, P.
Flow oriented supply chain management, the FLUENT approach
Conference or Workshop Item
1999Kovács, György and Paganelli, P.
Flow oriented supply chain management, the FLUENT approach
Conference or Workshop Item
1999Nacsa, János and Kovács, György and Kopácsi, Sándor
Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant
Conference or Workshop Item
1999Kovács, György and Nacsa, János and Kopácsi, Sándor
Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant
Conference or Workshop Item
1999Michelini, RC and Kovács, György
Knowledge organisation and govern-for-flexibility in manufacturing
Book Section
1999Kovács, György
Management of complex logistics flows, the FLUENT approach
Conference or Workshop Item
1999Mezgár, István and Kovács, György
PLENT: a European project on SME co-operation
Article
1999Kovács, György
Some technology transfer results achieved in and by Hungarian SMEs and academic institutions
Conference or Workshop Item
1999Kovács, György
Some technology transfer results achieved in and by Hungarian SMEs and academic institutions
Conference or Workshop Item
1999Giaone, L. and Kovács, György and Bokor, József and Széll, P. and Frank, P.
System for detection and prevention of unintended lane-departure of vehicles
Conference or Workshop Item
1999Kovács, György
Technology transfer day. March 2, 1999, Budapest, Hungary
Article
1999Kovács, György
University department - dedicated research laboratory. Is it a real conflict?
Conference or Workshop Item
1999Kovács, György and Széll, P. and Bokor, József and Palkovics, László and Gianone, L. and Semsey,
Vehicle control system for avoidance of lane-departure
Conference or Workshop Item
1999Palkovics, László and Kovács, György and Gianone, L. and Bokor, József and Széll, P. and Semsey,
Vision system for avoidance of Lane-depature
Conference or Workshop Item
1999Nacsa, János and Kovács, György
An integrated CAD/CAM system for robotized arc welding
Article
1999Mezgár, István and Kovács, György
A realized virtual enterprise architecture for SMEs
Conference or Workshop Item
1999Haidegger, Géza and Kovács, György and Mezgár, István
A vállalat egészét átfogó informatikai rendszer koncepciója
Book Section

2000

DateAuthor/TitleDocument Type
2000Kovács, György
Application of some intelligent tools and means to design robotic systems
Conference or Workshop Item
2000Mezgár, István and Kovács, György and Paganelli, P.
Co-operative production planning for small- and medium-sized enterprises
Article
2000Kovács, György
Computer aided design/computer aided manufacture (CAD/CAM), tutorial
Conference or Workshop Item
2000Kovács, György
Hungarian SMEs and academic institutions - some technology transfer results
Article
2000Nacsa, János and Kovács, György and Szederkényi, Gábor
Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant
Conference or Workshop Item
2000Haidegger, Géza and Kovács, György
Interactive multimedia as an affordable tool in factory environment
Conference or Workshop Item
2000Kovács, György and Nacsa, János and Haidegger, Géza
Some problems of intelligent control of open CNCs and manufacturing cells
Conference or Workshop Item
2000Kovács, György
Some technology transfer results: cooperating SMEs and academic institutions in intelligent manufacturing
Conference or Workshop Item
2000Kovács, György
Számítógéppel segített tervezés és gyártás
Article
2000Kovács, György
Technology transfer results achieved by Hungarian SMEs and academic institutions
Conference or Workshop Item
2000Palkovics, László and Kovács, György and Gianone, L. and Bokor, József and Széll, P. and Semsey,
Vision system for avoidance of lane-departure
Article
2000Mezgár, István and Kovács, György and Timkó, G. and Szabó, C.
A general model for representing non-manufacturing processes in SMEs; a casy study
Conference or Workshop Item
2000Kovács, György and Mezgár, István
A process model and its environment to manage non-manufacturing processes
Conference or Workshop Item

2001

DateAuthor/TitleDocument Type
2001Nacsa, János and Kovács, György
Alert State Detection and Switching Order Generation at a 400/120 kV Substation using Knowledge Server
Conference or Workshop Item
2001Erdélyi, F. and Kovács, György and Somló, J.
Automatizálás a gépgyártás-technológiában
Book Section

2002

DateAuthor/TitleDocument Type
2002Popa, A. and Kovács, György and Haidegger, Géza and Stanescu, A.
Are present multimedia technologies good enough for applications in idustrial environment?
Conference or Workshop Item
2002Mezgár, István and Kovács, György and Bonfatti, F.
Co-operative bidding of SMEs in health care sector
Book Section
2002Kovács, György
Education offered and performed by a research laboratory
Conference or Workshop Item
2002Nacsa, János and Kovács, György and Haidegger, Géza
Intelligent, open architecture controller using knowledge server
Conference or Workshop Item
2002Kovács, György and Kas, I.
Some information management and construction problems of a digital motion picture restoration system
Conference or Workshop Item
2002Kovács, György and Kas, I.
Some problems of a digital motion picture restoration system
Conference or Workshop Item
2002Nacsa, János and Kovács, György
Supporting SMEs in software requirement gathering in the field of automation
Conference or Workshop Item
2002Kovács, György
Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában
Conference or Workshop Item
2002Kopácsi, Sándor and Sárközy, F. and Kovács, György
Virtual reality in flexible manufacturing
Conference or Workshop Item

2003

DateAuthor/TitleDocument Type
2003Kovács, György and Bámer, B. and Haidegger, Géza
BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei
Article
2003Haidegger, Géza and Keul, ZS and Kovács, György and Peredi, Z.
Clustering individual truck owners - the implementation of novel ICT solutions
Conference or Workshop Item
2003Bölecz, M. and Czúni, L. and Gál, B. and Hanis, A. and Kovács, Levente Attila and Kránicz, B. and Licsár, A. and Szirányi, Tamás and Kovács, György and Manno, S. and Kas, I.
Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording
Conference or Workshop Item
2003Kovács, György
Digitális mozgókép-restauráló rendszer filmarchívumok számára
Book Section
2003Michelini, RC and Kovács, György
Integrated design for sustainability: intelligence for eco-consistent products and services
Article
2003Kovács, György and Michelini, RC
Intelligent integrated design for sustainability - products and services
Conference or Workshop Item
2003Kovács, György
Planning and management of large, distributer systems and projects
Conference or Workshop Item
2003Haidegger, Géza and Kovács, György and Bámer, B.
Recycling technology implementation by the integration of SME operations
Conference or Workshop Item
2003Kovács, György
Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában
Conference or Workshop Item
2003Nacsa, János and Kovács, György
Wearable computer applications in manufacturing systems
Conference or Workshop Item
2003Kovács, György and Kas, I.
A digital film-saver for archives
Article
2003Kovács, György and Paganelli, P.
A planning and management infrastructure for large, complex, distributed projects - beyond ERP and SCM
Article

2004

DateAuthor/TitleDocument Type
2004Kopácsi, Sándor and Kovács, György and Stokic, D. and Campos, AR
Classification of ideas in an industrial innovation management system
Conference or Workshop Item
2004Haidegger, Géza and Drozdik, Szilveszter and Bámer, B. and Kovács, György and Sárközy, F. and Nacsa, János and Biró, Zsolt and Kopácsi, Sándor and Boril, ZS and Szalay, T. and Anufriev, A.
Interactive multimedia test scenarios in digital factory projects
Conference or Workshop Item
2004Kovács, György and Haidegger, Géza and Popa, A.
Multimedia technologies provide test scenarios in a national research project
Conference or Workshop Item
2004Kovács, György and Drozdik, Szilveszter and Zuliani, P. and Succi, GC
Open source software and open data standards in public administration
Conference or Workshop Item
2004Kovács, György and Drozdik, Szilveszter and Zuliani, P. and Succi, GC
Open source software for the public administration
Article
2004Kovács, György and Gulyás, B. and Savic, I. and Perrett, DI and Cornwell, RE and Little, AC and Jones, BC and Burt, DM and Gál, Viktor and Vidnyánszky, Z.
Smelling human sex hormone-like compounds affects face gender judgment of men
Article
2004Kovács, György and Kas, I. and Manno, S. and Czúni, L. and Szirányi, Tamás and Hanis, A.
A complete solution for motion picture restoration: scanning, processing, recording
Conference or Workshop Item
2004Czúni, L. and Hanis, A. and Kovács, Levente Attila and Kránitz, B. and Licsár, A. and Szirányi, Tamás and Kas, I. and Kovács, György and Manno, S.
A digital motion picture restoration system for film archives
Article
2004Kovács, György and Kas, I. and Manno, S. and Czúni, L. and Szirányi, Tamás
An intelligent solution for motion picture restoration
Conference or Workshop Item

2005

DateAuthor/TitleDocument Type
2005Kovács, György and Haidegger, Géza
Business growth through European partnerships conference for SME-s. Budapest, 2005
Book (edited)
2005Michelini, RC and Kovács, György
Information infrastructures and sustainability
Conference or Workshop Item
2005Kovács, György and Haidegger, Géza and Nacsa, János
Interactive multimedia for supporting the quality of the production
Article
2005Nacsa, János and Bueno, R. and Alzaga, A. and Kovács, György
Knowledge management support for machine tool designers using expert enablers
Article
2005Drozdik, Szilveszter and Kovács, György and Kochis, PZ
Risk assessment of an open source migration project
Conference or Workshop Item
2005Kovács, György and Drozdik, Szilveszter and Kochis, PZ
Risk assessment of an open source migration project in the public administration
Conference or Workshop Item
2005Kovács, György and Kopácsi, Sándor
Some aspects of ambient intelligence
Conference or Workshop Item
2005Kovács, György and Haidegger, Géza and Drozdik, Szilveszter
Some interactive multimedia applications in production engineering
Conference or Workshop Item
2005Kovács, György and Drozdik, Szilveszter and Succi, G. and Zuliani, P.
Using open source software in the public administration
Conference or Workshop Item

2006

DateAuthor/TitleDocument Type
2006Kovács, György and Haidegger, Géza
Agent-based solutions to support car recycling
Conference or Workshop Item
2006Kovács, György and Kopácsi, Sándor and Haidegger, Géza and Michelini, R.
Ambient intelligence in product life-cycle management
ISI Article
2006Kovács, György
Management and production control issues of distributed enterprises
Conference or Workshop Item
2006Kovács, György and Nacsa, János
Robot applications in sheet-metal forming
Conference or Workshop Item
2006Kovács, György and Kopácsi, Sándor
Some aspects of ambient intelligence
Article
2006Kovács, György and Nacsa, János
Some robot application issues in sheet-metal forming
Conference or Workshop Item
2006Kovács, György and Kopácsi, Sándor
A survey on some aspects of ambient intelligence
Conference or Workshop Item
2006Kovács, György and Kopácsi, Sándor
A survey on some aspects of ambient intelligence
Conference or Workshop Item

2007

DateAuthor/TitleDocument Type
2007-02-08Palotási, A. and Kas, I. and Kovács, György
Eljárás és berendezés digitálisan tárolt mozgókép-információból mozifilm képkockák előállítására
Book (edited)
2007Kopácsi, Sándor and Mezgár, István and Kovács, György and Haidegger, Géza and Nacsa, János
Agent-based Predictive Maintenance of Machine Tools
Conference or Workshop Item
2007Kopácsi, Sándor and Kovács, György and Anufriev, A. and Michelini, R.
Ambient intelligence as enabling technology for modern business paradigms
ISI Article
2007Kovács, György and Haidegger, Géza
Car recycling - supported by agent-based solutions
Conference or Workshop Item
2007Kopácsi, Sándor and Mezgár, István and Haidegger, Géza and Nacsa, János and Kovács, György
Intelligens hálózatú gyártórendszerek
Conference or Workshop Item
2007Paniti, Imre and Kovács, György and Haidegger, Géza
Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz
Article
2007Kovács, György and Haidegger, Géza and Drozdik, Szilveszter and Biró, Zsolt and Kopácsi, Sándor and Lichodziejewski, C. and Puchalski, S. and Smater, M.
Multi-agent approach for managing production SME networks for optimising estimated costs/benefits
Conference or Workshop Item
2007Haidegger, Géza and Biró, Zsolt and Kovács, György
National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs
Conference or Workshop Item
2007Haidegger, Géza and Kovács, György and Kopácsi, Sándor and Drozdik, Szilveszter
Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s
Conference or Workshop Item
2007Kovács, György and Haidegger, Géza and Smater, M. and Spuchalski, S.
Recycling technologies for end-of-life vehicles based on multi-agent software solutions
Conference or Workshop Item
2007Accacia, G. M. and Kopácsi, Sándor and Kovács, György and Michelini, R. C. and Razzoli, R. P.
Service engineering and extended artefact delivery
Book Section
2007Paniti, Imre and Kovács, György and Haidegger, Géza and Nacsa, János
Tooling for novel ISF-incremental sheet forming
Conference or Workshop Item
2007Haidegger, Géza and Kovács, György and Kopácsi, Sándor and Drozdik, Szilveszter
A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére
Conference or Workshop Item

2008

DateAuthor/TitleDocument Type
2008Kovács, György
Az információtechnológia növekvő szerepe a vállalkozások/vállalatok nemzetközi együttműködésében
Conference or Workshop Item
2008Kovács, György and Haidegger, Géza
Car-recycling SME network with agent-based solutions
Article
2008Kovács, György and Kopácsi, Sándor and Haidegger, Géza
Intelligence management of product life-cycle - a maintenance view
Conference or Workshop Item
2008Haidegger, Géza and Kovács, György
ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért
Article
2008Kovács, György and Haidegger, Géza
SME networks for car recycling in Hungary: an agent-based approach
Book Section
2008Kovács, György
Some technology transfer achievements of Hungarian SMEs and Academic Institutions - EU perspectives
Conference or Workshop Item

2009

DateAuthor/TitleDocument Type
2009-08-27Kovács, György
Robotics and Automation
Conference or Workshop Item
2009Kovács, György and Haidegger, Géza and Stokic, D.
Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s
Article
2009Kovács, György
Hungarian IT technology transfer results and problems - some EU perspectives. Plenary paper
Conference or Workshop Item
2009Kovács, György and Kopácsi, Sándor and Haidegger, Géza and Nacsa, János
Managing maintenance in life-cycle engineering
Conference or Workshop Item
2009Haidegger, Géza and Kovács, György and Ruotsalainen, Werner and Stokic, D. and Lichodziejevski, C. and Urosevic, L. and Smater, M. and Puchalski, S. and Gramma, C. and Sorli, M. and Armijo, A. and Grosse-Hovest, G.
Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs
Conference or Workshop Item
2009Kovács, György and Kopácsi, Sándor and Haidegger, Géza and Nacsa, János
Role of maintenance in life-cycle engineering
Article
2009Kovács, György and Kopácsi, Sándor and Haidegger, Géza and Nacsa, János
A karbantartás szerepe az élettartamra tervezésben
Article

2010

DateAuthor/TitleDocument Type
2010-09Kovács, György and Haidegger, Géza
Some iteractive multimedia applications in manufacturing
Conference or Workshop Item
2010-05Kovács, György
Irányelvek a változtatásokhoz - a ManuFuture kapcsán
Article

2011

DateAuthor/TitleDocument Type
2011-09-27Kovács, György
Understanding enterprise delivery using the "TYPUS metrics"s and the "KILT model"
Conference or Workshop Item
2011Kovács, György and Haidegger, Géza
Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions
Conference or Workshop Item
2011Kovács, György and Haidegger, Géza
Interactive multimedia and tele-presence in production
ISI Article
2011Kovács, György and Haidegger, Géza
Some interactive multimedia applications in manufacturing
Other
2011Kovács, György
Understanding Enterprise Delivery Using the “TYPUS Metrics” and the “KILT Moddel”
Conference or Workshop Item

2012

DateAuthor/TitleDocument Type
2012Kovács, György
LUDUS: Serious Gaming Initiatives in South East Europe
Article
2012Kovács, György and Paniti, Imre
A New Robot Laboratory in SZTAKI
Conference or Workshop Item
2012Kovács, György and Kopácsi, Sándor
A New Robot Laboratory to Experiment Real and Virtual Environments
Conference or Workshop Item
2012Kovács, György and Paniti, Imre
A New Robotic Laboratory at SZTAKI
Article
2012Kovács, György
Reuse and Recycling for Sustainability (Research on Product Life-Cycle Management Using Cognitive Info-communications)
Conference or Workshop Item
2012Kovács, György
Some Ideas of the LUDUS SEE Project in Serious Games
Conference or Workshop Item
2012Kovács, György
A robot laboratory in real and virtual environments
Conference or Workshop Item

2013

DateAuthor/TitleDocument Type
2013Kovács, György
Evaluating Enterprize Delivery Using the TYPUS Metrics and the KILT Mode
ISI Article
2013Kovács, György
Evaluation of Value Changes between Different Phases of the Product Life-Cycle
Conference or Workshop Item
2013Kovács, György and Paniti, Imre
Re-make of Sheet Metal Parts of End of Life Vehicles - Research on Product Life-Cycle Management
Conference or Workshop Item
2013Kovács, György
Re-use of Sheet Metal Parts of EOL Vehicles Some Aspects of product Life-Cycle Management
Conference or Workshop Item
2013Kovács, György and Haidegger, Géza and Paniti, Imre and Kopácsi, Sándor and Kisari, Ádám
SMART-FRAME to Generate SMART SMEs
Conference or Workshop Item
2013Kopácsi, Sándor and Kovács, György and Nacsa, János
Some aspects of dynamic 3D representation and control of industrial processes via the Internet
ISI Article

2015

DateAuthor/TitleDocument Type
2015Kovács, György and Bogdanova, D and Yussupova, N and Boyko, M
Informatics Tools, AI Models and Methods Used for Automatic Analysis of Customer Satisfaction
Article
2015Kovács, György and Nacsa, János
An intelligent decision support system in a nuclear power plant
Book Section

2016

DateAuthor/TitleDocument Type
2016Kovács, György and Petunin, Alexander and Ivanko, Jevgenij and Yusupova, Nafissa
From the first chess-automaton to the mars pathfinder
Article
2016Kovács, György and Petunin, A
An information technology view of manufacturing automation - Product life-cycle management
Article

2019

DateAuthor/TitleDocument Type
2019Kovács, György
Some Remarks on Digital Production and on Product Life-Cycle Management
Book Section
This list was generated on Fri Aug 23 03:09:37 2019 CEST.