Items where Division is "Research Laboratory on Engineering & Management Intelligence" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Creators
Number of items: 52.
DateAuthor/TitleDocument Type
2018Beregi, Richárd József and Szaller, Ádám and Kádár, Botond
Synergy of multi-modelling for process control
Article
2018Byrne, G and Dimitrov, D and Monostori, László and Teti, R and van, Houten F
Biologicalisation: Biological transformation in manufacturing
Article
2018Care, A. and Csáji, Balázs Csanád and Campi, M.C. and Weyer, E.
Finite-sample system identification: An overview and a new correlation method
Article
2018Cserteg, Tamás and Erdős, Ferenc Gábor and Horváth, Gergely
Assisted assembly process by gesture controlled robots
Article
2018Csáji, Balázs Csanád
Szimmetria és konfidencia
Article
2018Fülep, I and Nick, Gábor András and Várgedő, T
Zászlón a digitalizáció - Ipar 4.0
Article
2018Gerencsér, László and Csáji, Balázs Csanád and Sabanis, S
Asymptotic Analysis of the LMS Algorithm with Momentum
Book Section
2018Gyulai, Dávid
Production and capacity planning methods for flexible and reconfigurable assembly systems
Thesis
2018Gyulai, Dávid and Pfeiffer, András and Bergmann, Júlia and Gallina, V
Online lead time prediction supporting situation-aware production control
Article
2018Gyulai, Dávid and Pfeiffer, András and Nick, Gábor András and Gallina, V and Sihn, W and Monostori, László
Lead time prediction in a flow-shop environment with analytical and machine learning approaches
Article
2018Györgyi, Péter and Hujter, B and Kisfaludi-Bak, S
On the number of touching pairs in a set of planar curves
Article
2018Györgyi, Péter and Kis, Tamás
Minimizing the maximum lateness on a single machine with raw material constraints by branch-and-cut
Article
2018Györgyi, Péter and Kis, Tamás
Minimizing the total weighted completion time in single machine scheduling with non-renewable resource constraints
Book Section
2018Gödri, I and Kardos, Csaba and Pfeiffer, András and Váncza, József
Scenario-based analysis in high-mix low-volume production environment
Book Section
2018Hecklau, F and Orth, R and Kidschun, F and Nick, Gábor András
The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Book Section
2018Horváth, Gergely and Kardos, Csaba and Kemény, Zsolt and Kovács, András and Pataki, Balázs and Váncza, József
Multi-Modal Interfaces for Human–Robot Communication in Collaborative Assembly
Article
2018Horváth, Markó and Kis, Tamás
Computing strong lower and upper bounds for the integrated multiple-depot vehicle and crew scheduling problem with branch-and-price
Article
2018Horváth, Markó and Kis, Tamás
Multi-criteria approximation schemes for the resource constrained shortest path problem
Article
2018Jósvai, J and Pfeiffer, András and Szántó, N and Monek, G
The role of digital twin in a cyber-physical production environment with prescriptive learning
Book Section
2018Kaihara, T and Nishino, N and Ueda, K and Tseng, M and Váncza, József
Value creation in production: Reconsideration from interdisciplinary approaches
Article
2018Kardos, Csaba and Kemény, Zsolt and Kovács, András and Pataki, Balázs and Váncza, József
Context-dependent multimodal communication in human-robot collaboration
Article
2018Kardos, Csaba and Kovács, András and Pataki, Balázs and Váncza, József
Generating HumanWork Instructions from Assembly Plans
Conference or Workshop Item
2018Kardos, Csaba and Váncza, József
Application of Generic CAD Models for Supporting Feature Based Assembly Process Planning
Article
2018Kardos, Csaba and Váncza, József
Mixed-initiative assembly planning combining geometric reasoning and constrained optimization
Article
2018Kemény, Zsolt and Beregi, Richárd József and Nacsa, János and Glawar, R and Sihn, W
Expanding production perspectives by collaborating learning factories-perceived needs and possibilities
Article
2018Kemény, Zsolt and Beregi, Richárd József and Nacsa, János and Kardos, Csaba and Horvath, D
Human robot collaboration in the MTA SZTAKI learning factory facility at Gyor
Article
2018Kolumbán, S. and Csáji, Balázs Csanád
Towards D-Optimal Input Design for Finite-Sample System Identification
Article
2018Konrád, K and Viharos, Zsolt János and Németh, G
Evaluation, ranking and positioning of measurement methods for pellet production
Article
2018Kovács, András
On the Computational Complexity of Tariff Optimization for Demand Response Management
Article
2018Kovács, Zsolt Ferenc and Viharos, Zsolt János and Kodácsy, János
Determination of the working gap and optimal machining parameters for magnetic assisted ball burnishing
Article
2018Kovács, Zsolt Ferenc and Viharos, Zsolt János and Kodácsy, János
The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure
Article
2018Kádár, Botond and Egri, Péter and Pedone, Gianfranco and Chida, T
Smart, simulation-based resource sharing in federated production networks
Article
2018Lingitz, L and Gallina, V and Ansari, F and Gyulai, Dávid and Pfeiffer, András and Monostori, László
Lead time prediction using machine learning algorithms: A case study by a semiconductor manufacturer
Article
2018Lovas, Róbert and Farkas, Attila and Marosi, Attila and Ács, Sándor and Kovács, József and Szalóki, Ádám and Kádár, Botond Géza
Orchestrated Platform for Cyber-Physical Systems
Article
2018Manzini, M and Unglert, J and Gyulai, Dávid and Colledani, M and Jauregui-Becker, J M and Monostori, László
An integrated framework for design, management and operation of reconfigurable assembly systems
Article
2018Mesterné Monostori, Judit
Supply chains’ robustness: Challenges and opportunities
Article
2018Monostori, László and Kádár, Botond and Nick, Gábor András and Pfeiffer, András and Várgedő, T
Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Book Section
2018Móricz, L and Viharos, Zsolt János and Németh, A and Szépligeti, A
Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation
Conference or Workshop Item
2018Móricz, L. and Viharos, Zsolt János and Németh, A. and Szépligeti, A.
Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation
Article
2018Najm, S M and Paniti, Imre
Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools
Article
2018Pedone, Gianfranco and Mezgár, István
Model similarity evidence and interoperability affinity in cloud-ready Industry 4.0 technologies
Article
2018Pfeiffer, András and Gyulai, Dávid and Szaller, Ádám and Monostori, László
Production Log Data Analysis for Reject Rate Prediction and Workload Estimation
Book Section
2018Preuveneers, D and Ilie Zudor, Angyalka
Special Issue: Big Data for context-aware applications and intelligent environments
Article
2018Preuveneers, D and Joosen, W and Ilie Zudor, Angyalka
Policy reconciliation for access control in dynamic cross-enterprise collaborations
Article
2018Preuveneers, D and Joosen, W and Ilie Zudor, Angyalka
Robust Digital Twin Compositions for Industry 4.0 Smart Manufacturing Systems
Book Section
2018Preuveneers, D and Rimmer, V and Tsingenopoulos, I and Spooren, J and Joosen, W and Ilie Zudor, Angyalka
Chained Anomaly Detection Models for Federated Learning: An Intrusion Detection Case Study
Article
2018Rödönyi, Gábor and Kőrös, P. and Pup, D. and Soumelidis, Alexandros and Szabó, Zoltán and Bokor, József
Structure Selection and LPV Model Identification of a Car Steering Dynamics
Article
2018Szaller, Ádám
Átfutási idő előrejelzése gyártórendszerekben gépi tanuló algoritmusok segítségével
Conference or Workshop Item
2018Szaller, Ádám and Béres, Ferenc and Piller, Éva and Gyulai, Dávid and Pfeiffer, András and Benczúr, András, ifj
Real-time prediction of manufacturing lead times in complex production environments
Conference or Workshop Item
2018Szalóki, I and Viharos, Zsolt János
Surface Structure Analysis of Syntactic Metal Foams Machined by Milling
Article
2018Tettamanti, Tamás and Csikós, Alfréd András and Kis, Krisztián Balázs and Viharos, Zsolt János and Varga, István
Pattern Recognition Based Speed Forecasting Methodology for Urban Traffic Network
Article
2018Tsutsumi, D and Gyulai, Dávid and Kovács, András and Tipary, Bence and Ueno, Y and Monostori, László
Towards joint optimization of product design, process planning and production planning in multi-product assembly
Article
This list was generated on Wed Aug 21 03:02:41 2019 CEST.